Ahoj potrebuju pomoc , když nastavím IP a port na dyn mapu dam restart a pak do prohlížeče zadam [http://93.91.250.134:27459/] hodí mi to stranku s bílím pozadím a textem :
Directory: /tiles/ 4096 bytes Dec 29, 2012 2:15:36 PM
confi:
Spoiler: zobrazit
# All paths in this configuration file are relative to Dynmap's data-folder: minecraft_server/plugins/dynmap/
# All map templates are defined in the templates directory
# The 'classic' FlatMap and KzedMap templates are used, which can be found in normal.txt, nether.txt, and skylands.txt
# To use these, do not set deftemplatesuffix (make sure deftemplatesuffix is commented, below)
# To use the HDMap very-low-res map templates as world defaults (normal-vlowres, nether-vlowres and skylands-vlowres), set value to vlowres
# The definitions of these templates are in normal-vlowres.txt, nether-vlowres.txt, and skylands-vlowres.txt
# To use the HDMap low-res map templates as world defaults (normal-lowres, nether-lowres and skylands-lowres), set value to lowres
# The definitions of these templates are in normal-lowres.txt, nether-lowres.txt, and skylands-lowres.txt
# To use the HDMap hi-res map templates (these can take a VERY long time for initial fullrender), set value to hires
# The definitions of these templates are in normal-hires.txt, nether-hires.txt, and skylands-hires.txt
deftemplatesuffix: hires
components:
- class: org.dynmap.ClientConfigurationComponent
- class: org.dynmap.InternalClientUpdateComponent
sendhealth: true
sendposition: true
allowwebchat: true
webchat-interval: 5
hidewebchatip: false
trustclientname: false
includehiddenplayers: false
# (optional) if true, player login IDs will be used for web chat when their IPs match
use-player-login-ip: true
# (optional) if use-player-login-ip is true, setting this to true will cause chat messages not matching a known player IP to be ignored
require-player-login-ip: false
# (optional) block player login IDs that are banned from chatting
block-banned-player-chat: true
# Require login for web-to-server chat (requires login-enabled: true)
webchat-requires-login: false
# If set to true, users must have dynmap.webchat permission in order to chat
webchat-permissions: false
# Limit length of single chat messages
chatlengthlimit: 256
# # Optional - make players hidden when they are inside/underground/in shadows (#=light level: 0=full shadow,15=sky)
# hideifshadow: 4
# # Optional - make player hidden when they are under cover (#=sky light level,0=underground,15=open to sky)
# hideifundercover: 14
# # (Optional) if true, players that are crouching/sneaking will be hidden
hideifsneaking: false
# If true, player positions/status is protected (login with ID with dynmap.playermarkers.seeall permission required for info other than self)
protected-player-info: false
#- class: org.dynmap.JsonFileClientUpdateComponent
# writeinterval: 1
# sendhealth: true
# sendposition: true
# allowwebchat: false
# webchat-interval: 5
# hidewebchatip: false
# includehiddenplayers: false
# use-player-login-ip: false
# require-player-login-ip: false
# block-banned-player-chat: true
# hideifshadow: 0
# hideifundercover: 0
# hideifsneaking: false
# # Require login for web-to-server chat (requires login-enabled: true)
# webchat-requires-login: false
# # If set to true, users must have dynmap.webchat permission in order to chat
# webchat-permissions: false
# # Limit length of single chat messages
# chatlengthlimit: 256
- class: org.dynmap.SimpleWebChatComponent
allowchat: true
# If true, web UI users can supply name for chat using 'playername' URL parameter. 'trustclientname' must also be set true.
allowurlname: false
# Note: this component is needed for the dmarker commands, and for the Marker API to be available to other plugins
- class: org.dynmap.MarkersComponent
type: markers
showlabel: false
enablesigns: false
# (optional) add spawn point markers to standard marker layer
showspawn: true
spawnicon: world
spawnlabel: "Spawn"
# (optional) layer for showing offline player's positions (for 'maxofflinetime' minutes after logoff)
showofflineplayers: false
offlinelabel: "Offline"
offlineicon: offlineuser
offlinehidebydefault: true
offlineminzoom: 0
maxofflinetime: 30
# (optional) layer for showing player's spawn beds
showspawnbeds: false
spawnbedlabel: "Spawn Beds"
spawnbedicon: bed
spawnbedhidebydefault: true
spawnbedminzoom: 0
spawnbedformat: "%name%'s bed"
- class: org.dynmap.ClientComponent
type: chat
allowurlname: false
- class: org.dynmap.ClientComponent
type: chatballoon
focuschatballoons: false
- class: org.dynmap.ClientComponent
type: chatbox
showplayerfaces: true
messagettl: 5
# Optional: set number of lines in scrollable message history: if set, messagettl is not used to age out messages
#scrollback: 100
# Optiona; set maximum number of lines visible for chatbox
#visiblelines: 10
# Optional: send push button
sendbutton: false
- class: org.dynmap.ClientComponent
type: playermarkers
showplayerfaces: true
showplayerhealth: true
# If true, show player body too (only valid if showplayerfaces=true
showplayerbody: false
# Option to make player faces small - don't use with showplayerhealth
smallplayerfaces: false
# Optional - make player faces layer hidden by default
hidebydefault: false
# Optional - ordering priority in layer menu (low goes before high - default is 0)
layerprio: 0
# Optional - label for player marker layer (default is 'Players')
label: "Players"
#- class: org.dynmap.ClientComponent
# type: digitalclock
- class: org.dynmap.ClientComponent
type: link
- class: org.dynmap.ClientComponent
type: timeofdayclock
showdigitalclock: true
#showweather: true
# Mouse pointer world coordinate display
- class: org.dynmap.ClientComponent
type: coord
label: "Location"
hidey: false
show-mcr: false
# Note: more than one logo component can be defined
#- class: org.dynmap.ClientComponent
# type: logo
# text: "Dynmap"
# #logourl: "images/block_surface.png"
# linkurl: "http://forums.bukkit.org/threads/dynmap.489/"
# # Valid positions: top-left, top-right, bottom-left, bottom-right
# position: bottom-right
#- class: org.dynmap.ClientComponent
# type: inactive
# timeout: 1800 # in seconds (1800 seconds = 30 minutes)
# redirecturl: inactive.html
# #showmessage: 'You were inactive for too long.'
#- class: org.dynmap.TestComponent
# stuff: "This is some configuration-value"
# Treat hiddenplayers.txt as a whitelist for players to be shown on the map? (Default false)
display-whitelist: false
# How often a tile gets rendered (in seconds).
renderinterval: 1
# How many tiles on update queue before accelerate render interval
renderacceleratethreshold: 60
# How often to render tiles when backlog is above renderacceleratethreshold
renderaccelerateinterval: 0.2
# How many update tiles to work on at once (if not defined, default is 1/2 the number of cores)
tiles-rendered-at-once: 2
# If true, use normal priority threads for rendering (versus low priority) - this can keep rendering
# from starving on busy Windows boxes (Linux JVMs pretty much ignore thread priority), but may result
# in more competition for CPU resources with other processes
usenormalthreadpriority: true
# Save and restore pending tile renders - prevents their loss on server shutdown or /reload
saverestorepending: true
# Zoom-out tile update period - how often to scan for and process tile updates into zoom-out tiles (in seconds)
zoomoutperiod: 30
# Tile hashing is used to minimize tile file updates when no changes have occurred - set to false to disable
enabletilehash: true
# Optional - hide ores: render as normal stone (so that they aren't revealed by maps)
#hideores: true
# Optional - enabled BetterGrass style rendering of grass and snow block sides
#better-grass: true
# Optional - enable smooth lighting by default on all maps supporting it (can be set per map as lighting option)
smooth-lighting: false
# Default image format for HDMaps (png, jpg, jpg-q75, jpg-q80, jpg-q85, jpg-q90, jpg-q95, jpg-q100)
# Has no effect on maps with explicit format settings
image-format: png
# use-generated-textures: if true, use generated textures (same as client); false is static water/lava textures
# correct-water-lighting: if true, use corrected water lighting (same as client); false is legacy water (darker)
# transparent-leaves: if true, leaves are transparent (lighting-wise): false is needed for some Spout versions that break lighting on leaf blocks
use-generated-textures: true
correct-water-lighting: true
transparent-leaves: true
# Control loading of player faces (if set to false, skins are never fetched)
#fetchskins: false
# Control updating of player faces, once loaded (if faces are being managed by other apps or manually)
#refreshskins: false
# Customize URL used for fetching player skins (%player% is macro for name)
skin-url: "http://s3.amazonaws.com/MinecraftSkins/%player%.png"
# Control behavior for new (1.0+) compass orientation (sunrise moved 90 degrees: east is now what used to be south)
# default is 'newrose' (preserve pre-1.0 maps, rotate rose)
# 'newnorth' is used to rotate maps and rose (requires fullrender of any HDMap map - same as 'newrose' for FlatMap or KzedMap)
compass-mode: newnorth
render-triggers:
#- playermove
#- playerjoin
- blockplaced
- blockbreak
- leavesdecay
- blockburn
- chunkgenerated
- blockformed
- blockfaded
- blockspread
- pistonmoved
- explosion
#- blockfromto
#- blockphysics
- structuregrow
- blockgrow
#- blockredstone
# Title for the web page - if not specified, defaults to the server's name (unless it is the default of 'Unknown Server')
#webpage-title: "My Awesome Server Map"
# The path where the tile-files are placed.
tilespath: web/tiles
# The path where the web-files are located.
webpath: web
# The network-interface the webserver will bind to (0.0.0.0 for all interfaces, 127.0.0.1 for only local access).
webserver-bindaddress: 93.91.250.134
# The TCP-port the webserver will listen on.
webserver-port: 27459
# Maximum concurrent session on internal web server - limits resources used in Bukkit server
max-sessions: 30
# Disables Webserver portion of Dynmap (Advanced users only)
disable-webserver: false
# Enable/disable having the web server allow symbolic links (true=compatible with existing code, false=more secure (default))
allow-symlinks: true
# Enable login support
login-enabled: false
# Require login to access website (requires login-enabled: true)
login-required: false
# Period between tile renders for fullrender, in seconds (non-zero to pace fullrenders, lessen CPU load)
timesliceinterval: 0.0
# Maximum chunk loads per server tick (1/20th of a second) - reducing this below 90 will impact render performance, but also will reduce server thread load
maxchunkspertick: 200
# Progress report interval for fullrender/radiusrender, in tiles. Must be 100 or greater
progressloginterval: 100
# Parallel fullrender: if defined, number of concurrent threads used for fullrender or radiusrender
# Note: setting this will result in much more intensive CPU use, some additional memory use. Caution should be used when
# setting this to equal or exceed the number of physical cores on the system.
#parallelrendercnt: 4
# Interval the browser should poll for updates.
updaterate: 2000
# If nonzero, server will pause fullrender/radiusrender processing when 'fullrenderplayerlimit' or more user's are logged in
fullrenderplayerlimit: 0
showplayerfacesinmenu: true
# Control whether players that are hidden or not on current map are grayed out (true=yes)
grayplayerswhenhidden: true
# Set sidebaropened: 'true' to pin menu sidebar opened permanently, 'pinned' to default the sidebar to pinned, but allow it to unpin
#sidebaropened: true
# Customized HTTP response headers - add 'id: value' pairs to all HTTP response headers (internal web server only)
#http-response-headers:
# Access-Control-Allow-Origin: "my-domain.com"
# X-Custom-Header-Of-Mine: "MyHeaderValue"
joinmessage: "%playername% joined"
quitmessage: "%playername% quit"
spammessage: "You may only chat once every %interval% seconds."
# format for messages from web: %playername% substitutes sender ID (typically IP), %message% includes text
webmsgformat: "&color;2[WEB] %playername%: &color;f%message%"
# Control whether layer control is presented on the UI (default is true)
showlayercontrol: true
# Enable checking for banned IPs via banned-ips.txt (internal web server only)
check-banned-ips: true
# Default selection when map page is loaded
defaultzoom: 0
defaultworld: world
defaultmap: flat
# (optional) Zoom level and map to switch to when following a player, if possible
#followzoom: 3
#followmap: surface
# If true, make persistent record of IP addresses used by player logins, to support web IP to player matching
persist-ids-by-ip: true
# If true, map text to cyrillic
cyrillic-support: false
# Messages to customize
msg:
maptypes: "Map Types"
players: "Players"
chatrequireslogin: "Chat Requires Login"
chatnotallowed: "You are not permitted to send chat messages"
# URL for client configuration (only need to be tailored for proxies or other non-standard configurations)
url:
# configuration URL
#configuration: "up/configuration"
# update URL
#update: "up/world/{world}/{timestamp}"
# sendmessage URL
#sendmessage: "up/sendmessage"
# login URL
#login: "up/login"
# register URL
#register: "up/register"
# tiles base URL
#tiles: "tiles/"
# markers base URL
#markers: "tiles/"
# Spout support controls
spout:
# If false, ignore spout even if detected
enabled: true
# If true, previously loaded textures will be assumed to still be valid (faster startup, but
# can result in stale textures if originals are updated - delete files in texturepacks/standard/spoout
# to clean cached textures and force reload on next startup)
use-existing-textures: true
# Set to true to enable verbose startup messages - can help with debugging map configuration problems
# Set to false for a much quieter startup log
verbose: false
# Enables debugging.
#debuggers:
# - class: org.dynmap.debug.LogDebugger
# All map templates are defined in the templates directory
# The 'classic' FlatMap and KzedMap templates are used, which can be found in normal.txt, nether.txt, and skylands.txt
# To use these, do not set deftemplatesuffix (make sure deftemplatesuffix is commented, below)
# To use the HDMap very-low-res map templates as world defaults (normal-vlowres, nether-vlowres and skylands-vlowres), set value to vlowres
# The definitions of these templates are in normal-vlowres.txt, nether-vlowres.txt, and skylands-vlowres.txt
# To use the HDMap low-res map templates as world defaults (normal-lowres, nether-lowres and skylands-lowres), set value to lowres
# The definitions of these templates are in normal-lowres.txt, nether-lowres.txt, and skylands-lowres.txt
# To use the HDMap hi-res map templates (these can take a VERY long time for initial fullrender), set value to hires
# The definitions of these templates are in normal-hires.txt, nether-hires.txt, and skylands-hires.txt
deftemplatesuffix: hires
components:
- class: org.dynmap.ClientConfigurationComponent
- class: org.dynmap.InternalClientUpdateComponent
sendhealth: true
sendposition: true
allowwebchat: true
webchat-interval: 5
hidewebchatip: false
trustclientname: false
includehiddenplayers: false
# (optional) if true, player login IDs will be used for web chat when their IPs match
use-player-login-ip: true
# (optional) if use-player-login-ip is true, setting this to true will cause chat messages not matching a known player IP to be ignored
require-player-login-ip: false
# (optional) block player login IDs that are banned from chatting
block-banned-player-chat: true
# Require login for web-to-server chat (requires login-enabled: true)
webchat-requires-login: false
# If set to true, users must have dynmap.webchat permission in order to chat
webchat-permissions: false
# Limit length of single chat messages
chatlengthlimit: 256
# # Optional - make players hidden when they are inside/underground/in shadows (#=light level: 0=full shadow,15=sky)
# hideifshadow: 4
# # Optional - make player hidden when they are under cover (#=sky light level,0=underground,15=open to sky)
# hideifundercover: 14
# # (Optional) if true, players that are crouching/sneaking will be hidden
hideifsneaking: false
# If true, player positions/status is protected (login with ID with dynmap.playermarkers.seeall permission required for info other than self)
protected-player-info: false
#- class: org.dynmap.JsonFileClientUpdateComponent
# writeinterval: 1
# sendhealth: true
# sendposition: true
# allowwebchat: false
# webchat-interval: 5
# hidewebchatip: false
# includehiddenplayers: false
# use-player-login-ip: false
# require-player-login-ip: false
# block-banned-player-chat: true
# hideifshadow: 0
# hideifundercover: 0
# hideifsneaking: false
# # Require login for web-to-server chat (requires login-enabled: true)
# webchat-requires-login: false
# # If set to true, users must have dynmap.webchat permission in order to chat
# webchat-permissions: false
# # Limit length of single chat messages
# chatlengthlimit: 256
- class: org.dynmap.SimpleWebChatComponent
allowchat: true
# If true, web UI users can supply name for chat using 'playername' URL parameter. 'trustclientname' must also be set true.
allowurlname: false
# Note: this component is needed for the dmarker commands, and for the Marker API to be available to other plugins
- class: org.dynmap.MarkersComponent
type: markers
showlabel: false
enablesigns: false
# (optional) add spawn point markers to standard marker layer
showspawn: true
spawnicon: world
spawnlabel: "Spawn"
# (optional) layer for showing offline player's positions (for 'maxofflinetime' minutes after logoff)
showofflineplayers: false
offlinelabel: "Offline"
offlineicon: offlineuser
offlinehidebydefault: true
offlineminzoom: 0
maxofflinetime: 30
# (optional) layer for showing player's spawn beds
showspawnbeds: false
spawnbedlabel: "Spawn Beds"
spawnbedicon: bed
spawnbedhidebydefault: true
spawnbedminzoom: 0
spawnbedformat: "%name%'s bed"
- class: org.dynmap.ClientComponent
type: chat
allowurlname: false
- class: org.dynmap.ClientComponent
type: chatballoon
focuschatballoons: false
- class: org.dynmap.ClientComponent
type: chatbox
showplayerfaces: true
messagettl: 5
# Optional: set number of lines in scrollable message history: if set, messagettl is not used to age out messages
#scrollback: 100
# Optiona; set maximum number of lines visible for chatbox
#visiblelines: 10
# Optional: send push button
sendbutton: false
- class: org.dynmap.ClientComponent
type: playermarkers
showplayerfaces: true
showplayerhealth: true
# If true, show player body too (only valid if showplayerfaces=true
showplayerbody: false
# Option to make player faces small - don't use with showplayerhealth
smallplayerfaces: false
# Optional - make player faces layer hidden by default
hidebydefault: false
# Optional - ordering priority in layer menu (low goes before high - default is 0)
layerprio: 0
# Optional - label for player marker layer (default is 'Players')
label: "Players"
#- class: org.dynmap.ClientComponent
# type: digitalclock
- class: org.dynmap.ClientComponent
type: link
- class: org.dynmap.ClientComponent
type: timeofdayclock
showdigitalclock: true
#showweather: true
# Mouse pointer world coordinate display
- class: org.dynmap.ClientComponent
type: coord
label: "Location"
hidey: false
show-mcr: false
# Note: more than one logo component can be defined
#- class: org.dynmap.ClientComponent
# type: logo
# text: "Dynmap"
# #logourl: "images/block_surface.png"
# linkurl: "http://forums.bukkit.org/threads/dynmap.489/"
# # Valid positions: top-left, top-right, bottom-left, bottom-right
# position: bottom-right
#- class: org.dynmap.ClientComponent
# type: inactive
# timeout: 1800 # in seconds (1800 seconds = 30 minutes)
# redirecturl: inactive.html
# #showmessage: 'You were inactive for too long.'
#- class: org.dynmap.TestComponent
# stuff: "This is some configuration-value"
# Treat hiddenplayers.txt as a whitelist for players to be shown on the map? (Default false)
display-whitelist: false
# How often a tile gets rendered (in seconds).
renderinterval: 1
# How many tiles on update queue before accelerate render interval
renderacceleratethreshold: 60
# How often to render tiles when backlog is above renderacceleratethreshold
renderaccelerateinterval: 0.2
# How many update tiles to work on at once (if not defined, default is 1/2 the number of cores)
tiles-rendered-at-once: 2
# If true, use normal priority threads for rendering (versus low priority) - this can keep rendering
# from starving on busy Windows boxes (Linux JVMs pretty much ignore thread priority), but may result
# in more competition for CPU resources with other processes
usenormalthreadpriority: true
# Save and restore pending tile renders - prevents their loss on server shutdown or /reload
saverestorepending: true
# Zoom-out tile update period - how often to scan for and process tile updates into zoom-out tiles (in seconds)
zoomoutperiod: 30
# Tile hashing is used to minimize tile file updates when no changes have occurred - set to false to disable
enabletilehash: true
# Optional - hide ores: render as normal stone (so that they aren't revealed by maps)
#hideores: true
# Optional - enabled BetterGrass style rendering of grass and snow block sides
#better-grass: true
# Optional - enable smooth lighting by default on all maps supporting it (can be set per map as lighting option)
smooth-lighting: false
# Default image format for HDMaps (png, jpg, jpg-q75, jpg-q80, jpg-q85, jpg-q90, jpg-q95, jpg-q100)
# Has no effect on maps with explicit format settings
image-format: png
# use-generated-textures: if true, use generated textures (same as client); false is static water/lava textures
# correct-water-lighting: if true, use corrected water lighting (same as client); false is legacy water (darker)
# transparent-leaves: if true, leaves are transparent (lighting-wise): false is needed for some Spout versions that break lighting on leaf blocks
use-generated-textures: true
correct-water-lighting: true
transparent-leaves: true
# Control loading of player faces (if set to false, skins are never fetched)
#fetchskins: false
# Control updating of player faces, once loaded (if faces are being managed by other apps or manually)
#refreshskins: false
# Customize URL used for fetching player skins (%player% is macro for name)
skin-url: "http://s3.amazonaws.com/MinecraftSkins/%player%.png"
# Control behavior for new (1.0+) compass orientation (sunrise moved 90 degrees: east is now what used to be south)
# default is 'newrose' (preserve pre-1.0 maps, rotate rose)
# 'newnorth' is used to rotate maps and rose (requires fullrender of any HDMap map - same as 'newrose' for FlatMap or KzedMap)
compass-mode: newnorth
render-triggers:
#- playermove
#- playerjoin
- blockplaced
- blockbreak
- leavesdecay
- blockburn
- chunkgenerated
- blockformed
- blockfaded
- blockspread
- pistonmoved
- explosion
#- blockfromto
#- blockphysics
- structuregrow
- blockgrow
#- blockredstone
# Title for the web page - if not specified, defaults to the server's name (unless it is the default of 'Unknown Server')
#webpage-title: "My Awesome Server Map"
# The path where the tile-files are placed.
tilespath: web/tiles
# The path where the web-files are located.
webpath: web
# The network-interface the webserver will bind to (0.0.0.0 for all interfaces, 127.0.0.1 for only local access).
webserver-bindaddress: 93.91.250.134
# The TCP-port the webserver will listen on.
webserver-port: 27459
# Maximum concurrent session on internal web server - limits resources used in Bukkit server
max-sessions: 30
# Disables Webserver portion of Dynmap (Advanced users only)
disable-webserver: false
# Enable/disable having the web server allow symbolic links (true=compatible with existing code, false=more secure (default))
allow-symlinks: true
# Enable login support
login-enabled: false
# Require login to access website (requires login-enabled: true)
login-required: false
# Period between tile renders for fullrender, in seconds (non-zero to pace fullrenders, lessen CPU load)
timesliceinterval: 0.0
# Maximum chunk loads per server tick (1/20th of a second) - reducing this below 90 will impact render performance, but also will reduce server thread load
maxchunkspertick: 200
# Progress report interval for fullrender/radiusrender, in tiles. Must be 100 or greater
progressloginterval: 100
# Parallel fullrender: if defined, number of concurrent threads used for fullrender or radiusrender
# Note: setting this will result in much more intensive CPU use, some additional memory use. Caution should be used when
# setting this to equal or exceed the number of physical cores on the system.
#parallelrendercnt: 4
# Interval the browser should poll for updates.
updaterate: 2000
# If nonzero, server will pause fullrender/radiusrender processing when 'fullrenderplayerlimit' or more user's are logged in
fullrenderplayerlimit: 0
showplayerfacesinmenu: true
# Control whether players that are hidden or not on current map are grayed out (true=yes)
grayplayerswhenhidden: true
# Set sidebaropened: 'true' to pin menu sidebar opened permanently, 'pinned' to default the sidebar to pinned, but allow it to unpin
#sidebaropened: true
# Customized HTTP response headers - add 'id: value' pairs to all HTTP response headers (internal web server only)
#http-response-headers:
# Access-Control-Allow-Origin: "my-domain.com"
# X-Custom-Header-Of-Mine: "MyHeaderValue"
joinmessage: "%playername% joined"
quitmessage: "%playername% quit"
spammessage: "You may only chat once every %interval% seconds."
# format for messages from web: %playername% substitutes sender ID (typically IP), %message% includes text
webmsgformat: "&color;2[WEB] %playername%: &color;f%message%"
# Control whether layer control is presented on the UI (default is true)
showlayercontrol: true
# Enable checking for banned IPs via banned-ips.txt (internal web server only)
check-banned-ips: true
# Default selection when map page is loaded
defaultzoom: 0
defaultworld: world
defaultmap: flat
# (optional) Zoom level and map to switch to when following a player, if possible
#followzoom: 3
#followmap: surface
# If true, make persistent record of IP addresses used by player logins, to support web IP to player matching
persist-ids-by-ip: true
# If true, map text to cyrillic
cyrillic-support: false
# Messages to customize
msg:
maptypes: "Map Types"
players: "Players"
chatrequireslogin: "Chat Requires Login"
chatnotallowed: "You are not permitted to send chat messages"
# URL for client configuration (only need to be tailored for proxies or other non-standard configurations)
url:
# configuration URL
#configuration: "up/configuration"
# update URL
#update: "up/world/{world}/{timestamp}"
# sendmessage URL
#sendmessage: "up/sendmessage"
# login URL
#login: "up/login"
# register URL
#register: "up/register"
# tiles base URL
#tiles: "tiles/"
# markers base URL
#markers: "tiles/"
# Spout support controls
spout:
# If false, ignore spout even if detected
enabled: true
# If true, previously loaded textures will be assumed to still be valid (faster startup, but
# can result in stale textures if originals are updated - delete files in texturepacks/standard/spoout
# to clean cached textures and force reload on next startup)
use-existing-textures: true
# Set to true to enable verbose startup messages - can help with debugging map configuration problems
# Set to false for a much quieter startup log
verbose: false
# Enables debugging.
#debuggers:
# - class: org.dynmap.debug.LogDebugger
Doufám že nekdo ví co stím... karma jistá
